Menciptakan dan menempatkan posisi lubang

Di sini kita akan mencoba menciptakan dan menempatkan posisi lubang dan bos.

Langkah langkah yang harus kita lakukan adalah :

1. Klik file > new > model > blank.

2. Start the Modeling application. (Start > Modeling)

3. Sketch > plane > rectangle > klik left mouse.

4. Create a boss.

Pilih Insert > Design Feature > Boss.

Masukkan nilai untuk :

Diameter = 8

Height = 1

Taper Angle = 0

Select the top face of the block (1) as the placement face.

Choose OK (MB2).

Notice Perpendicular is already selected.

Select edge (2) and enter a value of 8.

Select edge (3) and enter a value of 5.

Choose OK. (MB2)

Create a simple thru hole.

Choose the Hole icon. (Insert > Design Feature > Hole)

Choose Simple for the hole Type.

Key in a Diameter of 2.

Select the top face of the boss (1) as the placement face and the

bottom face of the block as the thru face.

Choose Apply.

Choose Point onto Point.

Select the top edge (2) of the boss.

Choose Arc Center.

ARUSHA 3DMAX